0
Your Cart
0
Your Cart

ABYSS 24V 100Ah Lithium Trolling Motor Battery

Tired of having to constantly recharge your trolling motor battery? What about that lingering fear of your battery dying in the middle of your fishing trip?

Swap your unreliable trolling batteries for a powerfulAbyss Battery 24V 100AhGroup 49 Battery.This single lithium battery is compact, lightweight, and will free up storage space on your boat by replacing two 12 volt Lead-acid or AGM batteries in series.

Whether youre trolling in calm weather or fighting the wind, this battery will back you up even with load-heavy consumption. Ideal for deep cycle applications in diverse marine environments, seasons, and temperatures, TheABYSS 24V 100Ah Lithium Trolling Motor Batterygives you a long and steady draw to last even for multi-day fishing trips.

Just set it, charge it, and off you go. Tight lines!

Design Features:

  • Higher qualified cylindrical cells

UL1642, IEC62619, IEC62133 listed with Cycle life more than 3000 times and excellent consistency.

    • Bluetooth Connectivity

    Monitor the battery status (charge, discharge, current, temperature, cycle life and so on) and change the data for different applications.

      • Built-in Heating

      Uniform internal heating is an important feature of our cold-weather performance batteries, as many external heating blanket options currently available cannot sense the internal temperature of the cells and may not be completely effective at heating the battery throughout. The system features proprietary technology that draws power from the charger itself, requiring no additional components. The entire process of heating and charging is completely seamless. Simply plug the battery into the regular lithium charger and the internal heating and monitoring system takes care of the rest.

      • More stable and firm internal structure

      The cell holders within our battery protect and separate each cell to avoid any short circuit risks caused by intense vibration or impact. The separation and space created between each cell also improves the overall heat dissipation within the battery pack while charging and discharging.

      GENERAL

      24V 100AH BATTERY DATASHEET

      TECHNICAL SPECIFICATIONS DETAILS
      Nominal Voltage 24V
      Nominal Capacity 100Ah
      Parallel Connection Maximum 4 units
      Serial Connection Maximum 2 units
      Bluetooth Management System (BMS) 8S100A (Available on Android/iOS)
      Charge Voltage 28.80.4V
      Standard Charge Current 20A
      Fast Charge Current 50A
      Max. Continuous Discharge Current 100A
      Peak Discharge Current 700A (300ms)
      Discharge Cut-off Voltage 20V
      Cycle Life 3000 cycles @ 100% Depth of Discharge (DOD) and 6000 cycles @ 80% DOD
      Self Discharge Rate Less than 3% per month
      Charge Efficiency 100% @0.2C
      Discharge Efficiency 98-100% @1C
      Operating Charge Temperature Range 0C to 55C (32F to 131F)
      Operating Discharge Temperature Range -20C to 60C (-4F to 140F)
      Storage Temperature Range -5C to 45C (23F to 113F)

      Physical Specifications

      • Dimensions:19.0″ x 6.69″ x 9.44″ in
      • 490171240mm (Group 49)
      • Approximate Weight:48 lbs (22 Kg)
      • Terminal Type:M8
      • Case Color/Material:Black Plastic case (ABS)
      • IP Rating:IP65
      • Cell Type:Cylindrical LiFePO4 cell
      • Cell Holder:Yes

      Additional Information

      • The battery features Bluetooth connectivity, allowing for monitoring via Android and iOS devices.
      • Compliant with international standards including UL 1642, IEC62133, IEC62619, CE, UN38.3, and ROHS.
      • Implemented strict quality control measures ensure reliability and consistency.

      CHARGING

      Battery Safety

      Abyss Battery strives to make the safest and most reliable lithium iron phosphate batteries for the most demanding environments, thats why our batteries are only made with certified components and used in applications around the world. All Abyss Lithium batteries conform to the standard entities and regulations listed below.SUPPLIER CODE OF CONDUCT

      Download 2021-2022 Abyss Battery Safety Data Sheet


      UL-Listed/IEC62133-2017We only use cells listed with UL standards entities.
      QUALITY AND ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO Certified)ISO 9001:2008 Quality Management System
      ISO 14001:2004 Environmental Management System
      IEC/UL 62133IEC62133 certifications and additional laboratory services are available as required by our OEM clients.

      Abyss Battery, Inc manufacturing process is compliant and licensed on a international level byTV Rheinland for Functional Safety as aresult of exposure to harsh marine environments such as vibration, impact, ignition protection, water ingress and salt spray corrosion common on pleasure craft and boats.TV Rheinlandstands for safety and quality in virtually all areas of business and life. TV Rheinlands highly qualified experts test technical systems and products around the world, support innovations in technology and business, train people in numerous professions and certify management systems according to international standards. In doing so, the independent experts generate trust in products as well as processes across global value-adding chains and the flow of commodities. Since 2006, TV Rheinland has been a member of the United Nations Global Compact to promote sustainability and combat corruption.

      UN/DOT 38.3: Lithium Battery Transportation

      All Abyss Battery, Inc. Lithium Batteries are required to pass section 38.3 of the UN Manual of Tests and Criteria, to ensure the safety of using products for our end users and for shipping purposes.We are proud of our investment to ensure our products have been UN38.3 certified.

      T1 Altitude Simulation
      This is low pressure testing that simulates unpressurized airplane space (cargo area) at 15,000 meter altitude.After storing batteries at 11.6kPa for >6 hours, these criteria shall be met: no mass loss, leaking, venting, disassembly, rupture or fire, and voltage within 10% of pre-test voltage.

      T2 Thermal Test
      This test covers changes in temperature extremes from -40C to +75C. Batteries are stored for 6 hours at -40C (12 hours for large cells/batteries), then 6 hours at +75C (12 hours for large cells/batteries), for a total of 10 cycles.Testing may be performed in a single chamber or thermal shock chamber, but less than 30-minute transitions shall be used.

      T3 Vibration
      This test simulates vibration during transportation. Test is a Sine Sweep: 7Hz 200Hz 7Hz in 15 Minutes; 12 Sweeps (3 hours); 3 mutually perpendicular axes.

      T4 Shock
      This test also simulates vibration during transportation. Test is a Half-Sine pulse: 150G/6ms for small cells/batteries; 50G/11ms for large cells/batteries; 3 pulses per direction; 6 directions (+/-z, +/-x, +/-y). Same pass criteria as T1.

      T5 External Short Circuit
      This test simulates an external short to the terminals of the cell or battery. At temperature of +55C, apply short circuit (<0.1ohm) across terminals. Maintain at least an hour after sample temperature returns to +55 +/-2C. Pass criteria are: Case temperature does not exceed +170C and no disassembly, rupture, or fire within 6 hours of test. Fuse, current limiting circuit, and venting mechanism activation are allowable.

      T6 Impact
      This test is only applicable to primary and secondary cells. For cylindrical cells >20mm diameter, it simulates impact to case of cell. For cylindrical cells <20mm diameter and all other cell constructions, it simulates crushing of a cell. Pass criteria for any type is: Case temperature does not exceed +170C & no disassembly or fire within 6 hours of test.

      T7 Overcharge
      This test is for secondary or rechargeable batteries only. It simulates an overcharge condition on a rechargeable battery: 2x the manufacturers recommended charge current for 24 hours. Then battery shall be monitored for 7 days for fire or disassembly.

      T8 Forced Discharge
      This testing simulates a forced discharge condition for primary and secondary cells only.

      Product Manual

      Click the links below to view and download owner’s manuals and instructions for your Abyss Battery products.

      BATTERY MANUAL

      CHARGER MANUAL

      BLUETOOTH APP QUICK GUIDE

      ELECTRIC REEL BATTERY

      ABYSS 12V120AH DATA SHEET

      GROUP 31 BATTERY DATA SHEET

      Warranty

      Thank you for taking interest in the products we offer at Abyss Battery. This Limited Warranty applies to physical goods, and only physical goods purchased from Abyss Battery.We recommend you protect your investment andregister your warranty.
      If your battery is not registered within 90 days of purchase, warranty will begin at manufacture date of battery.Proof of ownership is required. Warranties are not transferrable.Unlike other Lithium battery companies, Abyss Battery has additional support through the purchase of our Extended Warranty program.

      Manufacturers Limited Warranty

      Warranty Coverage 5-Year Free Replacement After 5 years, 35% Off a New Replacement up to 10-Years

      Extended Warranty

      Extended Coverage 7-Year Free Replacement After 7 years, 50% off a new Replacement For Life

      Enjoy 7 years of peace of mind when you buy ReCharge+ for your Battery. ReCharge+for Abyss Battery Extends your Free 5-Year Replacement Coverage by 2+ additionalyears from your purchase. In addition to a free battery replacement, youll get 24/7 priority access to our Battery experts by chat or phone.

      One stop for support:

      • 24/7priority access to Battery experts by chat or phone
      • Global repair coverage
      • Onsite repair for Batteries: Request that a technician come to your work site
      • Mail-in repair:Mail in your Battery using a prepaid shipping box provided by Abyss Battery
      • Carry-in repair:Bring your Battery in to our Authorized ServiceProviders

          Reviews

          There are no reviews yet.

          Be the first to review “ABYSS 24V 100Ah Lithium Trolling Motor Battery”

          Your email address will not be published. Required fields are marked *